According to the requirements of the circuit, it can also be used to amplify the negative feedback or positive feedback circuit, voltage-current conversion, input overload voltage or current protection components, and can be composed of RC circuit as oscillating, filtering, bypass, differential, integral and time constant components. Low-power carbon film resistors are usually made of carbon film enclosed in a plastic case, while power wound resistors are usually made of wire wound by wrapping a high resistivity metal wire around a porcelain core.

If a resistor has a resistance value close to zero ohm (for example, a large cross-section wire between two points), the resistor does not impede the current, and the circuit connecting the resistor is short-circuited and the current is infinite. If a resistor has an infinite or very large resistance, the circuit connected in series to the resistor may be considered open, with zero current. The resistors commonly used in industry fall somewhere between these two extremes in that they have a resistance that allows a current to pass through, but not as large as in a short circuit. The current limiting action of a resistor is similar to that of a small diameter pipe connected between two large diameter pipes to limit the flow of water.

Resistance, often abbreviated to R, is a basic property of conductors, which is related to the size, material and temperature of the conductor. Ohm's law states that I=V/R, then R=V/I, and the basic unit of resistance is the ohm, expressed by the Greek letter "Ω", which is defined as the resistance value of one ampere of current generated by applying a voltage of one volt to a conductor. The main function of a resistor is to obstruct the flow of electric current. In fact, the word "resistor" refers to a property, and the resistance commonly used in electronics is a component such as a resistor.